The whole world is supposed to be "going green" and supporting the "green agenda". How about instead of fattening up Al Gore's pockets and big industry profits that we do something to lower our own energy costs and therby help the environment!

PowerwoRx-e3 is a new product which provides a Whole House Energy System for the best possible energy savings and protection based upon a unique technology that provides three key benefits:

1. Energy Savings

2. Equipment Protection

3. Electrical Noise Filtration

1. Energy Savings

PowerwoRx e3 is an amazing new product which provides energy savings by reducing the amount of power drawn from your utility with the use of specially designed harmonic resistant capacitors. PowerwoRx e3 systems optimize your home's power factor thus reducing the amount of energy your homes motor loads use such as air conditioners, refrigerators, freezers, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans, etc. Motor loads require more energy to do their work compared to other electrical equipment in your home. The PowerwoRx e3's "power factor optimization" significantly increases the efficiency of your motor load and stores waste energy resulting in decreased demand and usage of electricity from your utility company. This equates to significant cost savings for you the home owner.

Power factor is the measurement of how efficient your electrical system is using the energy delivered to your home from your utility company. For example, your stove and dryer heating coils and incadescent light bulbs have a "power factor rating" of unity or 1. This equipment converts electric energy to heat and light. Motor loads as described above can have "power factor ratings" as low as .2. This combination of electric loads in American homes results in an average "power facotr rating" of .77 or less. the .77 indicates that your home is using more energy than it should to operate your electrical equipment. The PowerwoRx e3 technology has a proven track record of increasing a home's "power factor rating" to .95 or better.

2.Equipment Protection

PowerwoRx e3 technology provides Surge and Spike Suppression, a feature that will help protect and extend the useful life of your electrical equipment. Voltage surges and spikes come from many different internal and external sources such as utility grid changes, damaged transformers or electrical lines due to accidents or acts of God, old or out dated utility transformers that supply electrical power to your home, lightning and turning on and off major motor loads in your home. Typical homes in the United States are bombarded with literally hundreds of surges and spikes a day that damage sensitive electrical equipment over time. A combination of the PowerwoRx e3 harmonic resistant capacitors and metal oxide varistors (MOV's) give the home owner the maximum protection available on the market today. The external lights on the PowerwoRx e3 system provide an easy visual indicator that the system is protecting your home.

3. Electrical Noise Filtration

PowerwoRx e3 technology provides Harmonic Filtration which has become more important since the 1980's and almost mandatory going into the 21st Century due to the proliferation of computers, fax and copy machines and variable frequency drives which are know as "nonlinear loads". "Nonlinear loads" ask for and use electrical current in "pulses" unlike traditional electrical equipment. This pulse use of electrical current creates damaging noise, interference and heat on today's electrical systems causing interference within sensitive electrical equipment or worse causing them to overheat and fail. The use of computerized electronics within the American home has been growing at exponential rates and the need for filtering out the interference, noise and heat created by nonlinear loads has never been greater.

How Would This Help the Environment?

Installing the PowerwoRx e3 system in your home will reduce the need to produce electrical energy reducing the amount of coal and oil being burned to generate the electric energy, resulting in the reduction of environmentally harmful emissions of carbon dioxide, nitrous oxide and sulfur dioxide.

If 500,000 homes across the country installed PowerwoRx e3 systems this would reduce the need to generate 17 megawatts of electricity: saving 42,250 tons of coal or 231,500 barrels of oil and reducing by 98,250 tons of carbon dioxide, 42,000 pounds of nitrous oxide and 221,500 pounds of sulfur dioxide of annual greenhouse emissions.

Does the PowerwoRx e3 work in any home?
Yes it does, as long as you have a circuit breaker panel with breaker switches and not the old screw in type fuses, the unit will work on any single-phase electric application for homes. If you say "yes" to only two or more of the following then you could be saving a significant amount of money on your electric bill right now!
  • Is you home over 2500 square feet?
  • Is you central air conditioner/heat pump unit 3 years or older?
  • Is your forced air furnace 3 years or older?
  • Do you have a pool?
  • Do you have a well?
  • Do you use an air conditioner?
  • Is you refrigerator/freezer not EnergyStar rated?
  • Do you have moe than one refrigerator/freezer?
  • Is you washer/dryer not EnergyStar rated?
  • Do you have a hot tub or Jacuzzi?
  • Is you dishwasher not EnergyStar rated?
  • Do you have a number of appliances in your home?

Will the PowerwoRx e3 affect any of my appliances and their normal use?
No, if anything your motors will run about 10% cooler, which is good for a motor because heat is the enemy of a motor.

Is the PowerwoRx e3 tested and approved by independent labs?
Yes, the PowerwoRx e3 is UL Listed and tested. Also, the technology is recognized by the U.S. Department of Energy.

How much can I expect to save per month by using the PowerwoRx e3?
That depends on many factors. The size of you home, the amount of inductive motor load, and the amount you are paying per kilowatt-hour for electricity etc. However, generally speaking users of the product have seen up to 25% in reduced consumption, but the average savings is somewhere in the 8% to 15% range.

How long will it take for the PowerwoRx e3 to pay for itself?
That depends on your individual circumstances, number of appliances and age, electrical cost and usage patterns, but most units are paid within 2-3 years.

Is the PowerwoRx e3 easy to install?
Yes, but the PowerwoRx e3 must be installed by a licensed electrician. Installation requires opening up of the electrical panel, exposing potentially dangerous high voltage wires. The unit comes with complete installation instructions and install in about 15-30 minutes.

How long will the PowerwoRx e3 last?
It has a predicted lifespan of over 20 years.

Why haven't I heard of these products until now?
That's easy; two words "cost effectiveness". Up until recently, electric rates throughout America were cheap, costing 2,3 or 4 cents per kilowatt-hour. Now, electric rates are 8,10,12,14 ad 19 and in some cases New York City is 22 cents per Kwh, and Hawaii is 33.5 cents per Kwh. At the cheap rates the PowerwoRx e3 didn't make sense, but at the current rates, it makes all the sense in the world.

What about PowerwoRx e3 for Surge Protection?
One of the most important features of the PowerwoRx e3 is the ability to protect the entire home against power surges. No longer is there a need for so many surge protectors in the home. The PowerwoRx e3 provides a broad range of protection for hardwired appliances and most home electronics such as appliances, televisions, satellite equipment, entertainment systems, etc. The unit protects from power line surges as well as spikes caused by internal wiring problems, loose connections and fluctuating demand from large motors such as vacuum cleaners, heating and cooling equipment, etc.E3 power.biz